Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR
Minimax ME 35TR

Minimax ME 35TR

The Minimax ME 35TR is a 3-phase automatic edgebander with great flexibility for both thin and thick edges, intended to bridge the gap between a traditional small to mid-sized edge bander for woodworkers; to the more robust equipment used in the Classical line of products. Two of the key features are the pre-mill and corner rounding units. There is no competition in the U.S. market for such a small, versatile machine, with pre-mill or corner rounding that is so economical! This machine is meant to be used with melamine edges, PVC and ABS up to 3mm. This amazing machine boasts capacities usually only found on much larger and expensive machines. The ME 35TR comes with an anti-adhesive unit, pre-milling unit, end-cutting/corner rounding, top and bottom trimming, edge scraping, glue scraping, and buffing unit, with 3mm edge processing tooling in coils.

Premiered at the Xylexpo in Europe, the Minimax ME 35TR won first place under the “tooling machine” category for its ability to combine the corner-rounding and trimming features into a single tool, compact-sized machine with a minimal footprint. This applied technology makes this edgebanding machine a must-have product for small to medium sized facilities, the ideal one-stop machine for facing and trimming the front and rear ends of panels, while at the same time, rounding the front and back edges all at an affordable price for every shop.


- Corner Rounding end cutting unit for cutting and rounding of the panel.
- Anti-adhesive unit positioned before pre-milling unit to prevent glue sticking to upper and lower panel surfaces.
- Device for heating of the panel edge to optimize edgebanding in the case of cold working environments.
- PLC Control System
- Panel edge trimming unit for straight or radius trimming on thick or thin materials; PVC, ABS, Melamine, Laminate or Coiled Wood Tape.
- Interchangeable glue pot that allows for the glue pot tank to be easily removed and replaced.
- Gluing Unit with auto-sensory cooling to avoid burning of glue.
- Glue spreading roller with electrical resistance inside provides a uniform glue spread at maximum working temperature for the entire length of the roller.
- End Cutting Unit with high-frequency motor for the highest-quality finish.
- Temperature monitoring of the Roller.
- Top/Bottom Trim Unit with front and vertical copy shoes and high-frequency motors for faster rotating speeds.
- Cutters are designed for straight or radius trimming with numerical readout setup.
- Radius Edge Scrape for use on PVC/ABS edges with manual exclusion of the device when not in use.
- Glue Scraping unit for removal of excess glue on the panel edge/joint.
- Tilted, vertically adjustable Brushing Unit motors for the polishing and finishing on the panel edge and joints.


- Control panel and interface on machine infeed side
- Machine frame made of high rigidity ribbed steel to guarantee excellent support for the operating units
- Top thick steel pressure beam with rubber-coated wheels
- Track feed system
- Manual adjustment of top beam (panel height) with positioning of the operating units according to the selected panel thickness
- Numeric indicator of the selected panel thickness
- Specific glue smoke exhaust outlet
- Panel support roller which can be extended along the entire length of the machine
- Safety enclosure hood
- Electrical cabinet with new PLC and improved performance, 4-lines display, padlock capable main switch and overload protection push buttons

Minimax Edgebander FAQs


  Worktable dimensions

118” x 20.6”

(3000 x 525mm)

  Worktable height

35.5” (904mm)

  Thickness of rolled edges

0.4 - 3mm

  Min. to max. panel height

8 - 50mm

(.315” – 1.96”)

  Min. panel length/width with rolled edges

120/110mm (4.72”/4.33”)

  Feed speed

7 m/min (23 fpm)

  Feed motor power

.73 Hp (.55 kW)

  Operating temperature

68 - 374°F (20 - 190°C)


  Motor power

3 Hp (2.2 kW)

  Diamond cutter

Ø 80mm Z2 H=56

  Blade rotation speed

7,200 rpm

  Stock removal

0.5 / 1 / 1.5 / 2 mm


  Motor power

.33 Hp (.25 kW)

  Glue capacity

1.76 lbs. (.8 kg)


  Motor power

.46 Hp (.35 kW)


Ø 58mm Z4

  Blade rotation speed

12,000 rpm


  Upper/lower motor power

2x .47 Hp (.35 kW)

  Widia cutters

Ø 55.3 mm Z3

  Cutters rotational speed

12,000 rpm

  Vertical/horizontal copying devices



3-phase, 230v

  Pneumatic operating pressure

6.5 bar

  Exhaust outlet glue pot

60mm (2.36”)

  Exhaust outlet pre-milling unit (x2)

80mm (3.15”)

  Exhaust outlet trimming unit (x2)

60mm (2.36”)